RUFFO
09/06/2010, 12:40
CW700/800_TE_Dongle_How to
For those who have problems installing the New Dongle file for Telefonica
My CW was already working with their old bin & tps...
Do a factory default!
1.- Conect the CW Dongle to yor CW USB Port
2.- Load the 253 bin in to your flash drive
3.- Then connect the USB stick in the dongle
4.- Then you have the dongle connected and the Flash Drive
5.- Turn ON Your CW From the back switch
6.- Then when the message USB Ready apears press USB-> OK -> and will give you the option of loading the bin via dongle (Press YES Option)
7.- Now START loading the bin/file via dongle
8.- When finished will ask a reboot and do it!!!
9.- Wait and you will see the lights turning on and wait (Up to one Minute)
NOTE:
-If you wont see a picture after one minute, Press F1 000 (Patch unabled)
Then youll be watching tv again!!!!!!!!!!
One more Thing:
-Do Not remove the Flash drive from Dongle!!!!
-Must leave the Flas drive on Dongle for the service to Work!
================================================== ========================================
Spanish XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
================================================== ========================================
Para aquellos que tienen problemas al instalar el nuevo archivo Dongle para Telefónica
Mi CW ya estaba trabajando con el antiguo File y Tp's ...
Hacer un Factory Default!!!
1 .- Conecta la Dongle a tu CW (Puerto USB)
2 .- Cargar la actualizacion 253 en su unidad Flash drive
3 .- A continuación, conecte el Flash drive al puerto USB Dongle
4 .- Ahora ya que esta todo conectado y la unidad flash drive instalada
5 .- Encienda el CW Desde el interruptor de la parte trasera
6 .- Ahora, cuando aparesca el mensage ( USB Ready) en tu pantalla presiona la opsion USB-> OK-> y le dará la opción de cargar la actualizacion través de dongle (Pulse Opción YES)
7 .- Ahora comenzará a cargar el bin/file a través de dongle
8 .- Cuando termine pedirá reiniciar el sistema y hacerlo!
9 .- Espere y verá las luces de encender y esperar (hasta un minuto)
NOTA:
-Si usted no ve una imagen después de un minuto, presione F1 000 (Patch Enabled)
Entonces ya estaras vindo viendo la tele otra vez !!!!!!!!!!
Una cosa más:
-No extraer la unidad Flas drive de Dongle!!
-Debe dejar el Flash drive en el Dongle para que el servicio funcione!
enjoy...
For those who have problems installing the New Dongle file for Telefonica
My CW was already working with their old bin & tps...
Do a factory default!
1.- Conect the CW Dongle to yor CW USB Port
2.- Load the 253 bin in to your flash drive
3.- Then connect the USB stick in the dongle
4.- Then you have the dongle connected and the Flash Drive
5.- Turn ON Your CW From the back switch
6.- Then when the message USB Ready apears press USB-> OK -> and will give you the option of loading the bin via dongle (Press YES Option)
7.- Now START loading the bin/file via dongle
8.- When finished will ask a reboot and do it!!!
9.- Wait and you will see the lights turning on and wait (Up to one Minute)
NOTE:
-If you wont see a picture after one minute, Press F1 000 (Patch unabled)
Then youll be watching tv again!!!!!!!!!!
One more Thing:
-Do Not remove the Flash drive from Dongle!!!!
-Must leave the Flas drive on Dongle for the service to Work!
================================================== ========================================
Spanish XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
================================================== ========================================
Para aquellos que tienen problemas al instalar el nuevo archivo Dongle para Telefónica
Mi CW ya estaba trabajando con el antiguo File y Tp's ...
Hacer un Factory Default!!!
1 .- Conecta la Dongle a tu CW (Puerto USB)
2 .- Cargar la actualizacion 253 en su unidad Flash drive
3 .- A continuación, conecte el Flash drive al puerto USB Dongle
4 .- Ahora ya que esta todo conectado y la unidad flash drive instalada
5 .- Encienda el CW Desde el interruptor de la parte trasera
6 .- Ahora, cuando aparesca el mensage ( USB Ready) en tu pantalla presiona la opsion USB-> OK-> y le dará la opción de cargar la actualizacion través de dongle (Pulse Opción YES)
7 .- Ahora comenzará a cargar el bin/file a través de dongle
8 .- Cuando termine pedirá reiniciar el sistema y hacerlo!
9 .- Espere y verá las luces de encender y esperar (hasta un minuto)
NOTA:
-Si usted no ve una imagen después de un minuto, presione F1 000 (Patch Enabled)
Entonces ya estaras vindo viendo la tele otra vez !!!!!!!!!!
Una cosa más:
-No extraer la unidad Flas drive de Dongle!!
-Debe dejar el Flash drive en el Dongle para que el servicio funcione!
enjoy...