elfisico
01/01/2010, 22:09
nfusion_DA_iks files for iks paid for nova's
--------------------------------------------------------------------------------
tested and working great.
found another site
c/p:
HowTo Setup IKS on a Nfusion Nova, Solaris, Phoenix, or Neosat iPRO 1000
Load the boot_r3x_1.34.bin boot file in Boot Mode.
Load the R3X_2.0.1_newcam.bin bin file in Main Mode.
Load the proper chdata bin file depending on provider in Main Mode.
The bin file is from Europe so by default
it is in Pal mode and you will need to
change the Language as well in the Menu.
To change to multi mode from pal mode you will
need a picture to do that this will get you started
you will have to add the rest of the tp`s and sats you want
follow the following once you scan tune to one of the d*sh info
channels then change from pal to multi.
To get the screen to stop rolling you must first scan at least 1tp
then when you get a picture it will be black and white.
Go to the menu
then to system settings
the top bar in the system settings
is for language by default its set to turkish change to english.
the second bar is tv standard by default its set to pal mode
with the side arrows on remote flip back and forth then set on multi mode
you should get a brite yellow menu now.
You need to create a user entry for each of your sats. In the "Installation" menu, Antenna Setting, Select Satellite
of USER1, setup "LNB type" User Def. "LO Freq.low" 11250 "LO Freq" 34463 (I entered 99999 but it switched to 34463
so we may need to change this MAX value in the bin to scan properly!) Select your diseqc port and "0/12v switch" 12v
Create one entry above as USERx entry for each sat you have
Next go into "Channel Search" and select your USERx entry. You need to add each transponder (Add TP) at the bottom.
Note it will not find all other transpondes using the network search option in the Add TP Window.
Enter Frequency 12296, Polarization Hor, and Symbol Rate 20000 for the user entry you created for sat 119 and scan for
channels. (remember the names are wrong but you could fix that later)
In the internet panel Set "Network Connection" OFF "Auto Update Check" OFF Select "NEWCAMD" ON (you may need to switch it from ON to OFF then back to ON then enter the numbers 9949 then Press OK. This brings up the NEWCAMD Server settings. Enter your username and password, all other server settings should be already present. You may need to setup your home router for dynamic dns on the internet and point the nfusion to there (I did!) remember no numbers in the dns name. Restart the nfusion and test the channels on your private card.
On the remote issue just use the numbers on the remote, forget about the
changing the pad in the alpha\numeric option.
If receiver starts on PAL mode make sure chdata.bin is loaded and press the next sequence:
Put box on channel 2 or 3 for Dish or channel 107 for Bev
Menu
Down
OK
Down
Right
Exit
:cool:
--------------------------------------------------------------------------------
tested and working great.
found another site
c/p:
HowTo Setup IKS on a Nfusion Nova, Solaris, Phoenix, or Neosat iPRO 1000
Load the boot_r3x_1.34.bin boot file in Boot Mode.
Load the R3X_2.0.1_newcam.bin bin file in Main Mode.
Load the proper chdata bin file depending on provider in Main Mode.
The bin file is from Europe so by default
it is in Pal mode and you will need to
change the Language as well in the Menu.
To change to multi mode from pal mode you will
need a picture to do that this will get you started
you will have to add the rest of the tp`s and sats you want
follow the following once you scan tune to one of the d*sh info
channels then change from pal to multi.
To get the screen to stop rolling you must first scan at least 1tp
then when you get a picture it will be black and white.
Go to the menu
then to system settings
the top bar in the system settings
is for language by default its set to turkish change to english.
the second bar is tv standard by default its set to pal mode
with the side arrows on remote flip back and forth then set on multi mode
you should get a brite yellow menu now.
You need to create a user entry for each of your sats. In the "Installation" menu, Antenna Setting, Select Satellite
of USER1, setup "LNB type" User Def. "LO Freq.low" 11250 "LO Freq" 34463 (I entered 99999 but it switched to 34463
so we may need to change this MAX value in the bin to scan properly!) Select your diseqc port and "0/12v switch" 12v
Create one entry above as USERx entry for each sat you have
Next go into "Channel Search" and select your USERx entry. You need to add each transponder (Add TP) at the bottom.
Note it will not find all other transpondes using the network search option in the Add TP Window.
Enter Frequency 12296, Polarization Hor, and Symbol Rate 20000 for the user entry you created for sat 119 and scan for
channels. (remember the names are wrong but you could fix that later)
In the internet panel Set "Network Connection" OFF "Auto Update Check" OFF Select "NEWCAMD" ON (you may need to switch it from ON to OFF then back to ON then enter the numbers 9949 then Press OK. This brings up the NEWCAMD Server settings. Enter your username and password, all other server settings should be already present. You may need to setup your home router for dynamic dns on the internet and point the nfusion to there (I did!) remember no numbers in the dns name. Restart the nfusion and test the channels on your private card.
On the remote issue just use the numbers on the remote, forget about the
changing the pad in the alpha\numeric option.
If receiver starts on PAL mode make sure chdata.bin is loaded and press the next sequence:
Put box on channel 2 or 3 for Dish or channel 107 for Bev
Menu
Down
OK
Down
Right
Exit
:cool: