SOLVED - Neosat iPRO 2000+ DEAD !

[RUFFO]

SOLVED - Neosat iPRO 2000+ DEAD !
Found the solution to revive the dead Neosat iPRO 2000 PLUS !

Here are the steps:

1. Find another working Neosat iPRO 2000 PLUS;
2. Switch OFF (from the back switch) both units;
3. Disconnect any connections from both units;
4. Connect the units with the provided serial cable;
5. Carefully identify (mark) the working unit;
5. Press and hold the front Start button on the working unit;
6. Switch ON the back switch on the working unit;
7. Release the front Start button on the working unit;
8. "uPLD" will be displayed on the working unit;
9. Switch ON the damaged unit from the back switch;
10. The working unit will start to upload it's good software to the damaged unit;
11. The damaged unit will cycle twice;
12. WAIT ! till the damage unit will display "good";
13. Switch OFF then ON the newly repaired unit from the back switch;
14. Wait till the Menu will be displayed;